Jarder PH Minus Reducer Granules 1.5kg

PH Reducer Granules for Hot Tubs and Swimming Pools

Jarder PH minus granules helps to control PH levels in your hot tub or swimming pool. By maintaining a balanced PH level, your water remains safe and hygienic to swim or relax in. Should your PH levels go too high, use PH reducer to bring your PH levels to a safe level. 

Easy to apply

Easy to apply, mix the required amount of PH minus with clean, warm water in a seperate plastic container and apply to the hot tub/spa/pool. Ensure any jets are on to aid distribution. Maintaining a good level of PH helps protect your hot tub from breakdown. There is no need to empty the water after applying this product. Use 11g per 1000L of water or 22g per 1500L of water.

Directions for use:

Test the pH of your spa water and if it’s above 7.6, use this product to reduce your PH levels. Spa pH Minus can also be used for lowering total alkalinity if it rises above 150mg/l. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 1ltr of clean warm water.

Stir well to ensure the product is fully dissolved. Carefully add the resulting solution to the hot tub whilst the pump(s) are turned “on”. 2. After a minimum of 30 minutes, recheck the pH level and if necessary, repeat the treatment until the ideal pH level is established.